Two Diamond Nose Stud Dangle - Gold & White Gold

Available exclusively to BMG.

Packaging: BMG 'handmade nose stud' box
Material: 18ct Yellow Gold, 14ct White Gold or Palladium. Metal Facts
Diamond cut: Round brilliant. Good quality
Diamond colour: Near-colourless (G-H)
Diamond clarity: VS1 (high quality)
Diamond weight: 2x 1.2 point / 2x 0.012 carat
Diamond source: All diamonds come from a legitimate source not involved in funding conflict in compliance with UN resolutions.
Setting: Rub over
Origin: Handmade in one piece, in the BMG workshop in UK
Trademark - If you want the very best, there is no mistaking a genuine BMG piece.

This nose stud is the result of 30 years experience of Piercing, Goldsmithing and Diamond Setting.

Use our NEW Nose Stud Measuring Guide here.

CHOOSING YOUR TAIL SHAPE
_____________________________

THE "U" SHAPED TAIL

This shape of tail is favored by many piercers as it is very unlikely to fall out however it does have its own drawbacks and is not recommended unless you have worn this tail shape before and are 100% happy with it.

The "U" shaped tail is a stay put fitting which is suitable for most piercings that have a 1cm (USA 3/8”) clearance from the nasal cavity. i.e. not too low on the nose or it may hang out. Also if you nasal cavities can be seen clearly when looking straight into a mirror (i.e. the nose peak is high) - play safe and stick to the one of the other shapes. - The right/left selection brings the tail in and upwards into the nasal cavity.

The 18 gauge "U" is suitable for an initial needle piercing by a professional body piercer at their own discretion.

The "Half-U" SHAPED TAIL

The "Half-U" shaped tail is a secure nose stud which is suitable for nose piercings that have a 8mm (USA 5/16”) clearance from the nasal cavity. i.e. Similar to the U it should not be too low on the nose or it may hang out however some people who wear this simply flip it up and are quite happy to do this. Also again you will have to be careful if you nasal cavities can be seen clearly when looking straight into a mirror (i.e. the nose peak is high) The right/left selection brings the tail in and upwards into the nasal cavity.

The 18 gauge "Half-U" is suitable for an initial needle piercing by a professional body piercer at their own discretion.

"L" SHAPED TAIL

The "L" shaped stud is easy fit - This is the more usual stud suitable for most nose piercings and is by far the most popular style of tail and is used for most nose studs throughout the world. Most people find this the easiest to put in and remove.

The 18 gauge "L" is suitable for an initial piercing by a professional body piercer.

"PIN" TAIL

The "Pin". Suitable for most noses - it just pops through your pierce via a small fixed ball which is a little larger than the shaft. This type in shaft is getting more popular especially if you like to frequently change your jewellery – Please be aware that each and everyone is different and some people with hard or non-elastic skin find these difficult to push through the piercing as the ball is slightly thicker than the hole.

The "Pin" is NOT suitable for an initial piercing.

For more information on nose stud sizing - click here.

You can also download our FREE Nose Stud Report.

We offer a 3 Year Guarantee with our nose studs. Your piece will be sent to you in a sealed transparent tamper-proof bag. This allows you to see it before opening the packet and completing the sale. If for any reason there is something wrong with it simply return it with a copy of your invoice for a refund or repair, please note BMG and their agents reserve the right to refuse refund if the piece has been altered in any way other outside the BMG workshops.

Your piece will be delivered with a certificate of authenticity, your BMG guarantee and invoice. It comes in a small BMG presentation box.