Introduction Diamond Nose Studs - 24 styles to choose from.
BMG premium diamond nose studs are exceptional -

In fact with customer feedback together with our continued assessment - there is no comparison between a BMG nose stud and any other on the market today. Quite simply a BMG nose stud is the finest in the world. We stand by our claim and offer you our unique tamper bag return policy together with a 3 year guarantee.

The information below will enable you to decide on size of diamond, shaft gauge and tail shape offering the most comprehensive selection anywhere.

USA orders are dispatched from England within 24 hours of you placing the order. The nose jewelry will take just over a week delivered by USPS or 2/3 days via UPS or FedEx, just select your choice of carriage at the checkout.

Only BMG diamond nose studs are flat - like a dish or shallow cone so that they don't protrude from the nose. We use only fine white sparkling real diamonds.

Delivered to your door with a certificate of authenticity and a 3 year guarantee

Money back returns policy:
Your nose stud comes pre-sterilized in our tamper proof view bag, so you can inspect the stud before opening the bag to complete the sale. If you wish to return the goods for a refund (less postage). Just leave the bag intact and send it back quoting your order number.

Choose from nickel free 18-ct yellow gold or our very special mix of nickel free 14-ct palladium white gold. This is the only white gold which can be used for implantation as it un-plated and totally nickel free. Select your choice of gold from the drop down list below.

HAND MADE WITH PRIDE in ENGLAND UK- pictures (right) show Norman our setter and goldsmith making a 6 point diamond nose stud.

Advice on choosing your tail shape.

THE "U" SHAPED TAIL
The "U" shaped tail is a stay put fitting which is suitable for most piercings that have a 1cm clearance from the nasal cavity. i.e. not too low on the nose or it may hang out. Also if you nasal cavities can be seen clearly when looking straight into a mirror (i.e. the nose peak is high) - play safe and stick to the "L" or the "Pin" -

The "U" is suitable for an initial piercing by a professional body piercer.

"L" SHAPED TAIL - Fig 2
The "L" shaped stud is easy fit - This is the more usual stud suitable for most nose piercings. Order this one if you have any doubts with your choice.

The "L" is suitable for an initial piercing by a professional body piercer.

PUSH PIN TAIL - Fig 1
The Pin is our latest edition. Suitable for most noses - it just pops through your pierce via a small ball which is a little larger than the shaft. This type in shaft is getting more popular especially if you like to frequently change your jewellery - This style is also great for ears including the tragus (small triangle piece of cartilage at front of ear). We now supply these with a rubber ring which fits over the ball (shown in back on photograph) this is a clear ring when delivered. Use this as an option it may help you feel more secure when using the pin for the first few days.

The "Pin" is NOT suitable for an initial piercing.

Advice on choosing the Gauge or shaft thickness:

0.8mm or USA 20 gauge - This is the thinner out of the 2 choices being just a 0.8mm wire. Generally if your nose was pierced with a gun the wire on your stud will be slightly thinner. So if this is the case or you are unsure of your gauge this is the correct selection. Please note that some gun piercings could be 1mm - If you have got this wrong this stud should still go in OK.

1mm or USA 18 gauge - This is the thicker out of the 2 choices being just a 1mm wire. Generally if your nose was pierced with a needle the wire on your stud will be 1mm or 1.2mm making this the correct selection assuming you have not changed your stud or have always replaced it with the same gauge

Please note that some of the cheap nose studs sold in markets and cheap jewellery shops are as thin as 0.5 or 0.6mm . These nose studs have not been designed by professionals and are often made from intolerable metals such as silver or 9ct/10ct gold even plated gold's have been used. Any professional piercing establishment will not sell these or recommend them as they could harm your piercing.

Please print out the nose stud size guide to see for yourself the thickness of choice.

GENERAL
The head is as flat as we can get it with a very small surround of gold holding in the stone. The gemstones and diamonds are set rather than glued.

Please note that anyone using a gun to pierce your nose - is not a professional piercer.

 
CLICK FOR - PRINTABLE NOSE STUD SIZE GUIDE